Your robot

Open Robots in a matching Roboty for Mac development build. With no saved robots, choose Add a robot. The short guide asks for your kit and assembly state, then shows a review and the appropriate next step. A name is optional. Choose Add robot to save, or Save for later when identification or compatibility review is still needed. An unverified state is not a factory-default state.

The Add a robot workflow is in development and access is invitation-only. Powered owner commissioning and ordinary operation remain separately qualified. A public native installer is not available. The initial route supports the reviewed Seeed SO-ARM101 Standard or Pro follower profile on a compatible Apple Silicon Mac. Confirm the actual variant, servo labels, supply and controller. Unknown, custom or modified hardware needs compatibility review.

Your iPhone can accompany the Mac through the existing paired connection. It is optional and does not configure the controller by USB. A leader, camera, microphone, model, cloud account or Project is not required to add the follower. Simulation remains available without hardware.

A present adult operator must review the supported mounting, correct power supply, arm support and accessible disconnect before any powered step. Read the stopping procedure before connecting power. Saving a draft or reading this guide does not authorize hardware access.